Donate
Log In
Become a Member

Gallery

Jim Wenham

Items 1 to 12 of 20 total
Show per page
View as:
     
1 - Introduction

1 - Introduction

2 - Why Spruce Reeds?

2 - Why Spruce Reeds?

3 - Introduction to strips of spruce and varients in grain

3 - Introduction to strips of spruce and varients in grain

4 - Cutting the slips to size using template and plane

4 - Cutting the slips to size using template and plane

5 - Using gouges to chamfer and add curve to the slip

5 - Using gouges to chamfer and add curve to the slip

6 - Using sand paper to emphasise curve

6 - Using sand paper to emphasise curve

7 - Gouging the inside of the slip

7 - Gouging the inside of the slip

8 - Shaping the tails using the template

8 - Shaping the tails using the template

9 - Sanding the slip using a sanding block

9 - Sanding the slip using a sanding block

10 - Cutting the slip in half

10 - Cutting the slip in half

11 - Sanding both pieces on the inside

11 - Sanding both pieces on the inside

12 - Sanding both pieces on the outside

12 - Sanding both pieces on the outside

20 item in 2 pages
1 2 >

Gallery Information

Number of objects:
20
Last updated:
18 April 2023

Spruce Reedmaking with Jim Wenham

Favourite Share Feedback