Reedmaking Notes
20 - Assessing the reed for tuning and final adjustment
20 - Assessing the reed for tuning and final adjustment
19 - Fitting dry binding to the bottom of the reed
19 - Fitting dry binding to the bottom of the reed
18 - Attaching the bridle
18 - Attaching the bridle
17 - Trimming the tips
17 - Trimming the tips
16 - Finishing the reed
16 - Finishing the reed
15 - Binding the reed head to the staple
15 - Binding the reed head to the staple
14 - Preparing the staple
14 - Preparing the staple
13 - Four further steps to prepare the reed head for binding
13 - Four further steps to prepare the reed head for binding
12 - Sanding both pieces on the outside
12 - Sanding both pieces on the outside
11 - Sanding both pieces on the inside
11 - Sanding both pieces on the inside
10 - Cutting the slip in half
10 - Cutting the slip in half
9 - Sanding the slip using a sanding block
9 - Sanding the slip using a sanding block
Reedmaking
Articles on Reedmaking from An Píobaire